mechanical suggested pad layout .100 2,54 .018 typ 0,46 h1xxx date code country of origin .395 10,03 .500 12,70 note .540 13,72 .040 1,02 0-8 .100 typ 2,54 .230 5,84 1.000 .005 25,40 0,13 .025 min 0,64 .005 0,13 .700 17,78 .100 2,54 .700 17,78 .004/0,10 16 surfaces h1013, h1015, h1033, h1035, H1043, h1081, h1093, h1119 usa 858 674 8100 ? ? uk 44 1483 401 700 ? ? france 33 3 84 35 04 04 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 32181071 ? ? china 86 769 5538070 ? ? taiwan 886 2 26980228 www.pulseeng.com 1 h314.d (8/06) 10/100base-tx single port transformer modules with various transmit turns ratios dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 note: pin 4 is omitted on the h1015. rohs-5 peak reflow temperature rating 235c rohs-6 peak reflow temperature rating 245c meets ieee 802.3 specification designed for use with transceivers for amd & micrel electrical specifications @ 25c ? operating temperature 0c to 70c rohs-5 3 rohs-6 4 turns ratio insertion loss return loss crosstalk compliant compliant ( 5%) (db max) (db min) (db min) hipot part part (vrms min) number number tx rx 100 khz-100 mhz 30 mhz 60 mhz 80 mhz 30 mhz 60 mhz 100 mhz h1013 ? 1: 2 1:1 -1.0 -16 -12 -10 -45 -38 -34 1500 h1015 h1015nl 2c 1: 2 1:1 -1.0 -16 -12 -10 -45 -38 -34 1500 h1033 h1033 2d 1: 2 1:1 -1.0 -16 -12 -10 -45 -38 -34 1500 h1035 ? 1: 2 1:1 -1.0 -16 -12 -10 -45 -38 -34 1500 H1043 H1043 2c 1: 2 1:1 -1.0 -16 -12 -10 -45 -38 -34 1500 h1081 h1081nl 2d 1: 2 1:1 -2.0 -18 -12 -11 -45 -38 -34 1500 h1093 h1093 2c 1: 2 1:1 -1.0 -16 -12 -10 -45 -38 -34 1500 h1119 h1119 2c 1: 2 1:1 -2.0 -16 -11 -10 -45 -38 -34 1500 1. for tape & reel packaging, add suffix ?t? to the end of the part number when ordering e.g. h1081 t . 2. msl= moisture sensitivity level a=1 b=2 c=3 d=4 e=5. 3. rohs-5: product does not contain 5 out of the 6 banned substances specified in the rohs directive (product contains lead in application s considered solder). 4. rohs-6: product does not contain 5 out of the 6 banned substances specified in the rohs directive. some internal connections may contai n lead in high-temperature solder (solder alloys containing more than 85% lead). note: the h1093 has been optimized for use with the kendin ks8761 (now micrel).
www.pulseeng.com 2 h314.d (8/06) h1013, h1033, H1043, h1093 2 1 3 receive 6 8 7 15 16 14 11 9 10 transmit 15 note: h1047 has an autotransformer on 14 16 15 receive 1 2 3 12 10 11 7 6 5 transmit h1035, h1081, h1119 1 2 3 7 6 5 receive 14 16 15 12 10 11 transmit 12 the h1081 incorporates an autotransformer, so there is no connection to the tx transformer center tap. note: schematics tape and reel specifications h1015
weight . . . . . . . . . . .3.00 grams tape & reel . . . . . . . . .350/reel tube . . . . . . . . . . . . . . .20/tube note: modules are packaged in tubes, unless tape & reel is specified. add the suffix ?t? such as h1013 t for tape & reel orders. 10/100base-tx single port transformer modules with various transmit turns ratios performance warranty of products offered on this data sheet is limited to the parameters specified. data is subject to change w ithout notice. other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. ? copyright, 2006. pulse engineering, inc. all rights reserved. for more information: pulse worldwide headquarters 12220 world trade dr. san diego, ca 92128 u.s.a. www.pulseeng.com tel: 858 674 8100 fax: 858 674 8262 pulse south asia 150 kampong ampat #07-01/02 ka centre singapore 368324 tel: 65 6287 8998 fax: 65 6280 0080 pulse north asia no. 26 kao ching rd. yang mei chen taoyuan hsien taiwan, r. o. c. tel: 886 3 4641811 fax: 886 3 4641911 pulse china headquarters no. 1 industrial district changan, dongguan china tel: 86 769 85538070 fax: 86 769 85538870 pulse north china room 1503 xinyin building no. 888 yishan rd. shanghai 200233 china tel: 86 21 54643211/2 fax: 86 21 54643210 pulse european headquarters einsteinstrasse 1 71083 herrenberg germany tel: 49 7032 7806 0 fax: 49 7032 7806 12
|
